For Sperry Sails to build a headsail that fits properly, fill out the following information and call us with any questions you might have.
Please fill in the form below :
General information
1) What type of boat do you have?
2) What size sail would you like?
3) Roller furling or hank-on?
4) If roller furling, which direction does the drum turn when pulling on the furling line and looking down on the drum? (Clockwise or counterclockwise)
Measure the following
5) Hoist- With halyard up as far as it will go
6) Swivel- Shackle to shackle
7) Height of drum- Pin to tack shackle
8) J dimension- Pin to mast
9) Base of headstay to front of genoa track
10) Base of headstay to back of genoa track
Optional measurements
11) Leech- With halyard as far up as it will go to where you would like to see the clew land, around shrouds if necessary
12) Foot- Shackle on drum to where you would like the clew to land.
Name
Phone Number
General information
A- Aft face of mast to reef hook
B- Aft face of mast to tack pin
C- Top face of boom to tack pin
D- Tack pin to max outhaul pin
E- Top face of boom to clew pin*
F- Aft face of mast to reef cheek block**
G- Aft face of mast to reef cheek block**
H- Width of internal slide
I- Diameter of slug
J- Width of external track
K- Attach tape measure to halyard and hoist until it stops. Measure to the top of the boom
L- With the halyard at the same location, hold the boom at the proper height and measure to the max outhaul position
